(2) Confirm the position of the document pressure sheet. (1) Clean the platen glass and the document pressure sheet. (1) Confirm cable connection (CCD cable). Timing slit disk feed film, or timing slit disk eject film (1) Confirm that the LF / EJ slit film is free from smearing or scratches: (1) Confirm that the carriage slit film is free from smearing or scratches: The part in the paper path causing the smearing Print head *1 (when smearing is caused by the print head) ressure roller unit (if smearing is heavy) Whether the ink tank is refilled one or not
No remainder of the outer film (the air. Smeared printing, uneven printing, or non. Unsatisfactory print quality No printing, or no color ejected. PE sensor board ass'y - Pressure roller unit Pick-up arm unit (for paper feeding error from the cassette) ASF unit (for paper feeding error from the rear tray) (3) Confirm the PF rear cover and the cassette conditions. (2) Confirm that the paper guides are set properly. (1) Examine and remove any foreign material from the following parts: (1) Examine and remove any foreign material from the drive portions. => No incomplete connection, cable breakage, or cable caught in units (4) Document pressure sheet (sponge sheet) replacement (1) For smeared printing, uneven printing, or non-ejection of ink (7) Capacitive sensor sensitivity setting
(3) LF / Eject correction (automatic / manual) Adjustment and Maintenance in User Modeģ-3. (9) Purge drive system unit (right plate) and switch system unit (left plate) removalģ-2. (1) External housing, scanner unit, and document cover removal (6) Preventive replacement of ink absorber.(4) Document pressure sheet (sponge sheet) replacement.(7) Capacitive sensor sensitivity setting.(3) LF / Eject correction (automatic / manual).Service Call Error (by Cyclic Blinking of Alarm and Power LEDs) Troubleshooting
Operator Call Error (by Alarm LED Lit in Orange) Troubleshooting
0 kommentar(er)
